The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÜV Rheinland.
  See BRA41652 for bleed valve cover

   This part is due back in stock soon, call 01484 841395 to reserve yours

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Complete Brembo P32 rear brake caliper

Also known as Guzzi ref. 20516171, 20516151. This replaces the original but discontinued P2 F05 caliper and is not identical. Supplied with brake pads

 This part is available by special order, request a quote

 23653011 GU23653011 23 65 30 11
 2365 3011 2365.3011 23.65.30.11

Rebuild kit for Brembo P32 rear caliper. This is a comprehensive overhaul kit containing replacement dust seals, fluid seals, o ring, bleed nipple, dust cap, washers, brake grease and caliper bolts. One kit required per caliper. Also suitable for some Ducati / Aprilia models.

Caliper seal kit

 This part is available by special order, request a quote

Rear brake master cylinder, foot operated. Brembo no longer offer overhaul kits for recent models so this is your only option if your master cylinder is faulty.

 This part is available by special order, request a quote

AP8133643

Also fits Aprilia Caponord 1000 (2004-2007), Aprilia Pegaso 650 (2005-2009)

Threaded linkage block used on brake or gear linkages (varies by model). Screws to M6 threaded rod

Wears over time, so we recommend replacing if your gear or brake linkage is sloppy

 This part is available by special order, request a quote

 18257551 GU18257551 18 25 75 51
 1825 7551 1825.7551 18.25.75.51

Stainless steel complete right hand 320mm floating front brake disc including bobbins and black rotor

These floating rotors use stainless steel for the braking surface, mated to a lightweight hub cast from aluminum by way of 5 drive pins. Does not include threaded holes for mounting the ABS ring. Marked with arrow for direction of rotation.

We recommend that you always purchase new pads with your new rotors.Use disc bolt BRA81286. Always fit new brake pads when replacing a brake disc - see BRA01653

 This part is due back in stock soon, call 01484 841395 to reserve yours

B044279

Also fits Aprilia AF1 Futura (1990-1992), Aprilia 125 Extrema (1997-), Aprilia125 MX (2004-2007), Aprilia 125 RS (1989-1997), Aprilia 125 Tuono (2004-2005), Aprilia 650 Pegaso Strada (2005-2009), Aprilia 750 Dorsoduro (2008-), Aprilia 750 Shiver (2007-), Aprilia 850 Mana (2007-), Aprilia RSV 1000 (1998-), Aprilia SL Falco (2000-2004), Aprilia Tuaono (2003-), Aprilia 1200 Dorsoduro ABS (2011-), Aprilia 1200 Shiver GT ABS (2009-), Benelli 899 Century Racer, KTM 625 SXC/SMC, KTM 640 Duke, KTM 640 LC4, KTM 690 SM (2007-), KTM 690 SM Prestige (2007-), KTM 690 SMC, KTM 990 Super Duke, Bimota BB 1 SUPERMONO (1995-1996), Bimota BB 1 SUPERMONO Biposto (1996-1997), Bimota DB 2 (1993-1995), Bimota DB 3 Mantra (1995-1998), Bimota DB4 (1998-1999), Bimota DB5 (2005-), Bimota DB6 Delirio (2006-), Bimota SB 6 (1994-1996), Bimota SB 6 R (1997-1998), Bimota SB 8 R (1998-), Bimota V-DUE (1997-2000), Bimota YB 7/J (1988-1989), Bimota YB 10 BIPOSTO (1992-1993), Cagiva 125 Mito), Cagiva 125 Planet (1997-), Cagiva 125 Super City), Cagiva 500 River), Cagiva 600 River (1995-), Ducati 350 SS (1991-1992), Ducati 400 SS (1993-1993), Ducati 600 SS (1994-1998), Ducati 620 Multistrada (2002-2004), Ducati 620 Sport (2003-), Ducati 748 Biposto (1995-1997), Ducati 748 R (2001-2002), Ducati 748 S (2000-2002), Ducati 748 SP (1995-1997), Ducati 748 SPS/R (1998-2000), Ducati 750 SS Nuda (1991-2002), Ducati 800 SS (2003-), Ducati 851 (1989-1994), Ducati 888 (1990-1993), Ducati 900 Sport (2002-2002), Ducati 900 SS (1991-2002), Ducati 900 SS Nuda (1991-1991), Ducati 900 SS Superlight (1992-1994), Ducati 907 Paso i.e. (1991-1992), Ducati 916 (1994-1998), Ducati 916 (955), Corsa (1995-1995), Ducati 916 (996), (1997-2000), Ducati 916 Biposto (1994-1998 Ducati 916 S (1994-), Ducati 916 Senna (1995-), Ducati 916 SP (1994-), Ducati 996 R (2001-), Ducati 996 S (2001-), Ducati 998 (2002-2005), Ducati 998 R Testastretta (2002-2002), Ducati 998 S (2002-2002), Ducati 1000 SS (2003-2006), Ducati GT 1000 (2006), Ducati GT Touring 1000 (2009-), Ducati Monster 600 ALL (1994-2001), Ducati Monster 620 Dark (2002-), Ducati Monster 620 i.e (2002-2006), Ducati Monster 696 (2008-2009), Ducati Monster 750 (1996-2001), Ducati Monster 800 S (2003-), Ducati Monster 900 (1993-2002), Ducati Monster 900 S (1998-2001), Ducati Monster 1000 (2002-2005), Ducati Monster S 2 R 1000 (2006-2007), Ducati Monster S 4 (2001-2003), Ducati Monster S 4 R (2003-2008), Ducati ST 2 (1997-2002), Ducati ST 4 (1999-2000), Ducati ST 4 S (2001-2003), Gilera 125 GFR (1993-), Laverda 650 Ghost (1998), Laverda 668 (1997-1997), Laverda 750 Formula (1998-2002), Laverda 750 Ghost Strike (1998), Laverda 750 Sport (2000-2001), Mondial 999 (2003-), Moto Morini 998 (2006-), Moto Morini 1200 (2005-), MZ 1000S, Voxan 1000 (2000-)

M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap

 Availability varies on this part, check availability

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

Rebuild kit for Grimeca F05 (P5) type calipers with 32mm pistons

This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).

Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model.

 This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4

Stainless steel complete left hand 320mm floating front brake disc including bobbins and black rotor

These floating rotors use stainless steel for the braking surface, mated to a lightweight hub cast from aluminum by way of 5 drive pins. Does not include threaded holes for mounting the ABS ring. Marked with arrow for direction of rotation.

We recommend that you always purchase new pads with your new rotors.Use disc bolt BRA81286. Always fit new brake pads when replacing a brake disc - see BRA01653

 This part is due back in stock soon, call 01484 841395 to reserve yours

B044280

Also fits Aprilia AF1 Futura (1990-1992), Aprilia 125 Extrema (1997-), Aprilia125 MX (2004-2007), Aprilia 125 RS (1989-1997), Aprilia 125 Tuono (2004-2005), Aprilia 650 Pegaso Strada (2005-2009), Aprilia 750 Dorsoduro (2008-), Aprilia 750 Shiver (2007-), Aprilia 850 Mana (2007-), Aprilia RSV 1000 (1998-), Aprilia SL Falco (2000-2004), Aprilia Tuaono (2003-), Aprilia 1200 Dorsoduro ABS (2011-), Aprilia 1200 Shiver GT ABS (2009-), Benelli 899 Century Racer, KTM 625 SXC/SMC, KTM 640 Duke, KTM 640 LC4, KTM 690 SM (2007-), KTM 690 SM Prestige (2007-), KTM 690 SMC, KTM 990 Super Duke, Bimota BB 1 SUPERMONO (1995-1996), Bimota BB 1 SUPERMONO Biposto (1996-1997), Bimota DB 2 (1993-1995), Bimota DB 3 Mantra (1995-1998), Bimota DB4 (1998-1999), Bimota DB5 (2005-), Bimota DB6 Delirio (2006-), Bimota SB 6 (1994-1996), Bimota SB 6 R (1997-1998), Bimota SB 8 R (1998-), Bimota V-DUE (1997-2000), Bimota YB 7/J (1988-1989), Bimota YB 10 BIPOSTO (1992-1993), Cagiva 125 Mito), Cagiva 125 Planet (1997-), Cagiva 125 Super City), Cagiva 500 River), Cagiva 600 River (1995-), Ducati 350 SS (1991-1992), Ducati 400 SS (1993-1993), Ducati 600 SS (1994-1998), Ducati 620 Multistrada (2002-2004), Ducati 620 Sport (2003-), Ducati 748 Biposto (1995-1997), Ducati 748 R (2001-2002), Ducati 748 S (2000-2002), Ducati 748 SP (1995-1997), Ducati 748 SPS/R (1998-2000), Ducati 750 SS Nuda (1991-2002), Ducati 800 SS (2003-), Ducati 851 (1989-1994), Ducati 888 (1990-1993), Ducati 900 Sport (2002-2002), Ducati 900 SS (1991-2002), Ducati 900 SS Nuda (1991-1991), Ducati 900 SS Superlight (1992-1994), Ducati 907 Paso i.e. (1991-1992), Ducati 916 (1994-1998), Ducati 916 (955), Corsa (1995-1995), Ducati 916 (996), (1997-2000), Ducati 916 Biposto (1994-1998 Ducati 916 S (1994-), Ducati 916 Senna (1995-), Ducati 916 SP (1994-), Ducati 996 R (2001-), Ducati 996 S (2001-), Ducati 998 (2002-2005), Ducati 998 R Testastretta (2002-2002), Ducati 998 S (2002-2002), Ducati 1000 SS (2003-2006), Ducati GT 1000 (2006), Ducati GT Touring 1000 (2009-), Ducati Monster 600 ALL (1994-2001), Ducati Monster 620 Dark (2002-), Ducati Monster 620 i.e (2002-2006), Ducati Monster 696 (2008-2009), Ducati Monster 750 (1996-2001), Ducati Monster 800 S (2003-), Ducati Monster 900 (1993-2002), Ducati Monster 900 S (1998-2001), Ducati Monster 1000 (2002-2005), Ducati Monster S 2 R 1000 (2006-2007), Ducati Monster S 4 (2001-2003), Ducati Monster S 4 R (2003-2008), Ducati ST 2 (1997-2002), Ducati ST 4 (1999-2000), Ducati ST 4 S (2001-2003), Gilera 125 GFR (1993-), Laverda 650 Ghost (1998), Laverda 668 (1997-1997), Laverda 750 Formula (1998-2002), Laverda 750 Ghost Strike (1998), Laverda 750 Sport (2000-2001), Mondial 999 (2003-), Moto Morini 998 (2006-), Moto Morini 1200 (2005-), MZ 1000S, Voxan 1000 (2000-)

Pair of sintered EBC FA244HH front brake pads for P4 30/34 F calipers with two pad pins (Brembo 6800 and 9970 calipers). Sintered pads offer improved braking performance but will wear your discs more quickly than organic pads

Guzzi pad reference is 01654630. Also fitted to some pre 2001 Cali EV's - check how many pins your brake caliper has if ordering for a 1997-2001 Cali EV. Also known as Guzzi ref. 2B003313, 61340211A, 01654630, 07670810, 07BB1935, AP8133614, 883673, 2B005736

 Order now and we will post your order within 7 days.

 32654610 GU32654610 32 65 46 10
 3265 4610 3265.4610 32.65.46.10